Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-01-2015, 05:09 AM   #1
Jersey Joe 67
Senior Member
 
Jersey Joe 67's Avatar
 
Join Date: Jul 2010
Location: Jersey Shore
Posts: 113
Default Help with my 46 Super Deluxe Coupe Sedan

Quote:
Originally Posted by 39topless View Post
You have probably figured this out, but the access to the fender bolts is up inside the fenders with the tire off. Because of the rust you have,you probably won't be able to loosen these bolts. I would go into the trunk and behind the rear seats and just cut or grind off the nuts. Then let what's left of the bolt fall back through the hole and the fender will fall off. You can get replacements of the fender bolts and nuts.

Thanks 39 Topless,
Yes I kinda figured that was the way to go as far as removing them but I like to ask questions before jumping in feet first lol.
As you can see in the pic below someone has obviously removed them previously and wasn't going for originality when replacing them;

I'm sure the plus side to this is I'll be able to remove the bolts without much penetrating oil or cutting lol

Sent from my iPhone using Tapatalk
Jersey Joe 67 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:41 AM.