Kit for mating juice brakes to early spindles-Richard's Early V8 garage?

[JSeery]

Speedway is not always popular on here, but they have them.

[Tim Ayers]

Originally Posted by JSeery

Speedway is not always popular on here, but they have them.

Hi:

Do you know what the list it under? I only found the F-100 and Mustang II conversion kits on their site. I guess I could call, but I'd like to have a part # on hand. Seems to help the ordering process.

Thanks,

Tim

[trainguy]

Originally Posted by JSeery

Speedway is not always popular on here, but they have them.

I have never had any problems with Speedway,I only wish some of the other suppliers were a good as them!Phil

[JSeery]

Originally Posted by trainguy

I have never had any problems with Speedway,I only wish some of the other suppliers were a good as them!Phil

I agree, but because they sell a lot of none USA parts they are not held in high esteem. But it is about the same with most of the suppliers. Only sure way out is NOS!

[JM 35 Sedan]

Originally Posted by trainguy

I have never had any problems with Speedway,I only wish some of the other suppliers were a good as them!Phil

I agree with this post. Have purchased many things from Speedway, and many orders have been heavy parts that were sent with free shipping. I know some of their stuff is "knock off" from China, but I usually know how to avoid that.

[john in illinois]

Sponsored Links (Register now to hide all advertisements)

On my model A I had trouble with the cone rotating with the seal and wearing.
This caused frequent wheel bearing adjustments when I was on a long trip.

I discovered MT Car products Had ones that were a light press fit on the spindle and with a little locktite ,they have been trouble free.

http://www.mtcarproducts.com/Adapters-and-Spacers.html

John