Featherfill high build primer

[Droobie]

I used PPG's epoxy primer/sealer (dont remember the numbers on it sorry) after all the body work was done. Sanded it with 220 then I used Evercoats Featherfill (two good coats) sanded it again with 220. After the Featherfill was sanded and blown off I shot another coat of the epoxy primer sealer then lightly sanded again with 320. Three coats of base and three coats of clear. I am by far no painter but I think it came out great. I am supposed to wet sand and buffer her in three weeks. I had a pro guiding me along the venture.. I have just a few pictures in my album of my Tudor