Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-09-2013, 05:34 PM   #1
msmaron
Senior Member
 
msmaron's Avatar
 
Join Date: May 2010
Location: Wauconda, IL
Posts: 3,604
Default Timing on Model A w/B Distrib....UPDATE & REPAIR!!!

Any help is appreciated. Have a B Cover on my Model A Engine and just in stalled a newly restored B Distributor.

Set Point gap at .20, found BTDC with timing pin in B Hole. set cam timing with a light to get it perfect. Have a original pop out switch modified with the quick connect wire to a armored cable to B distributor, new points, new condenser. New distributor body and cap, extended copper straps from the spark plug to the distrib for good solid connection.

Getting great spark at points, getting spark from coil wire to head nut making the gap, fuel fine, elec fine and full 6 volts, all accessories working fine also.
CANNOT get it to start at all. Turns over fine but wont catch at all. Fuel flow is fine just will NOT Catch and start..

ANY Help would be appreciated.
__________________
A7191-Sport Coupe
29 Roadster
29-Town Sedan
29-Original Special Coupe

Last edited by msmaron; 05-11-2013 at 10:38 AM.
msmaron is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:38 AM.