The Ford Barn

Terry, NJ · 02-07-2012, 06:07 PM

I am not an artist! I am a technician! I need a print, or at least some dimensions for my 30 Town Sedan (4dr). I bought my top wood and sills/rails from one of the two manufacturers. (It doesn't matter which one) But nary a drawing, schematic, or even a target list of numbers to shoot for. So what are the angles, widths, lengths, and Heights that the body should be when it's done? There's too much flex available in the kit (Top side rails for one) to just proceed and start screwing things together. Whyinhell don't these manufacturers give some advice with these kits Like finish dimensions? We certainly pay enough for them.
Terry

02-07-2012, 06:07 PM	#1
Terry, NJ Senior Member Join Date: May 2010 Location: Bucks Co, Pa Posts: 3,749	Body Measurements, Wood I am not an artist! I am a technician! I need a print, or at least some dimensions for my 30 Town Sedan (4dr). I bought my top wood and sills/rails from one of the two manufacturers. (It doesn't matter which one) But nary a drawing, schematic, or even a target list of numbers to shoot for. So what are the angles, widths, lengths, and Heights that the body should be when it's done? There's too much flex available in the kit (Top side rails for one) to just proceed and start screwing things together. Whyinhell don't these manufacturers give some advice with these kits Like finish dimensions? We certainly pay enough for them. Terry