Can't Get Hub On

[[email protected]]

Rear Brakes. It came off with no problem. I installed Ted's Brake Floater Kit. One side goes on just fine. I switched the shoes and hubs around and the other side won't go on. I have the cotter pins facing out. It appears to be a shoe problem. The rollers are seated all the way down like they are supposed to be. The rods that go from the brake shoe and into the adjuster assy all stick out the same amount. I had a couple of the experienced club members look at it and they couldn't figure it out. The adjuster is all the way out. I know it's difficult to diagnose from afar but, any ideas?