Holley 94 Rebuild - Secondary Carb

[Ziggster]

Installed the choke shaft thinking I need to plug the shaft holes in the body. Then had to come up with an idea to keep it from dialling out, so installed the choke lever with detent and spring. Added a lock washer (only washer with correct ID on hand) to the shaft to take up some side to side play. Would be intetested in what others have done to seal off those holes. This is pretty much it for now regarding this carb. Will mount to intake and remove my other carb from the engine and install it on the dual carb intake this afternoon to start looking at the linkage.