Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-19-2025, 11:29 AM   #1
old31
Senior Member
 
Join Date: Jan 2016
Posts: 2,691
Default Alignment issue 31

What would cause this?

For a while, my roadster has been pulling slightly to the right. It is more noticeable the faster I go.

I noticed that the right front tire has been wearing out on the outside edge. I changed that tire to the left rear. I have radials.

I changed the toe in to 1/16 and the pull got worse. Then to 1/32 and that became worse.

I then changed it to 3/16 toe OUT and it got better, but still with a very slight pull to the right.

I have never had an issue before with 1/16 toe in.

Last edited by old31; 12-22-2025 at 05:35 PM.
old31 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:20 AM.