34 pickup splash apron fitment

[drfromnc]

I’ve been working on getting my 34 pickup put together as a test fit before tearing it back apart to get prepped and sprayed with epoxy primer. Cab and bed mounted as well as running boards and all 4 fenders.

I am having an issue with bolting (clamping) the splash apron in place where the gap between apron and grille shell looks right (see picture, too much gap) how much gap should there be there?

Caveat; pass fender doesn’t have a hole in it to bolt to the top of the frame horn. It does have holes on flange where apron is bolted to fender. Driver fender does have hole in fender to bolt to top of frame horn but it does not have holes on flange to attach apron (had to weld on a flange)

Of course need to mark and drill holes mentioned above but would like to get it aligned better.