The Ford Barn

38 coupe · 03-24-2024, 06:53 AM

Your measured lift numbers sounded familiar for some reason so I went searching. Sure enough, reported measured lift by a Barn member on a NOS EAB camshaft was similar to what you are finding on your used EA cam. I can't explain the deviation from reported lift by every other source for these cams. Link to other thread here: https://fordbarn.com/forum/showthread.php?t=336984

Regardless, the NOS Canadian cam is a great way to go for the vehicle you have. Does anyone have a Canadian manual so we know what valve lash should be with the cam?

03-24-2024, 06:53 AM	#11
38 coupe Senior Member Join Date: May 2010 Location: South Texas Posts: 2,135	Re: 276 stroker from 35 years of parts Your measured lift numbers sounded familiar for some reason so I went searching. Sure enough, reported measured lift by a Barn member on a NOS EAB camshaft was similar to what you are finding on your used EA cam. I can't explain the deviation from reported lift by every other source for these cams. Link to other thread here: https://fordbarn.com/forum/showthread.php?t=336984 Regardless, the NOS Canadian cam is a great way to go for the vehicle you have. Does anyone have a Canadian manual so we know what valve lash should be with the cam?