'36 221 - rebuildable??

[sjaakslinger]

Originally Posted by bobH

I don't 'speak-mm', so I converted from 3/8 and came up with something a little heavier that what Mart posted. So, as post 58 suggests, I'd go with the two. But, from my perspective, being old and lazy, I'd BUY a mount... previously discussed and posted here on the barn. (obviously, just opinion)

Being in The Netherlands makes getting a mount a bit difficult, they're not readily available. We came up with design like in the pics. We found a tube just thick enough to snugly fit in the stand. We used the exhaust manifold as a template and makes 2 plates that go together. To be sure.

We'll weld some additional triangle shaped support brackets between the tube and the plate.


Any other suggestions are welcome.

Verstuurd vanaf mijn SM-G781B met Tapatalk