Stuck Head

[BillCNC]

OK guys, I'm about to break stuff, and I'm in a I don't care attitude!

I have been trying to remove a head that is stuck beyond reason. I have been working on it going onto day 5 tomorrow, which In have set to my limit. Either the head comes off tomorrow, or it getting cut off with a die grinder, I'm so done with this. I had to walk away from the car last night because I had a hammer in my hand and I started looking at the windshield.

I have all but 4 studs removed. One is flush with the deck, and the other three just below the head. I have been digging between the copper trying to get out the insulator material. I can lift car off the ground while driving polycarbonate wedges. Rubber mallet, hitting blocks of wood with a mini jack.

NOTHING

Tomorrow, the plan is to remove the engine and cut the head into pieces unless someone has some magic trick up their sleeve. I have gone through a can of liquid wrench over the last two weeks while driving, and now I need a refill on my oxy/acet set up.

Regards
Bill