The Ford Barn

Mart · 05-06-2022, 08:07 AM

Hello and welcome to Mart's Garage. In this video I am finally ready to start up the 286 cu in flatty. That's 3-3/8" bore and 4" stroke. I have a few issues to contend with along the way, but am able to take the car for an initial run. I then get a second run after addressing some issues.
I hope you find it interesting, it's another step in the right direction in getting the car ready for racing on the beach at Pendine.
Thanks to all who have been following the big inch flatty build and the Pendine Prep series.
Mart.

https://youtu.be/r2P0gkn5ieo

05-06-2022, 08:07 AM	#1
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 9,240	2223 Pendine Prep 14. Big inch Flatty First Start and Drive! Yay! Hello and welcome to Mart's Garage. In this video I am finally ready to start up the 286 cu in flatty. That's 3-3/8" bore and 4" stroke. I have a few issues to contend with along the way, but am able to take the car for an initial run. I then get a second run after addressing some issues. I hope you find it interesting, it's another step in the right direction in getting the car ready for racing on the beach at Pendine. Thanks to all who have been following the big inch flatty build and the Pendine Prep series. Mart. https://youtu.be/r2P0gkn5ieo