Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-24-2022, 02:48 PM   #1
russcc
Senior Member
 
Join Date: May 2010
Posts: 2,871
Default Ignition information

Just got back from EV8 swap in Fitchburg MA. Cool & windy, a lot of vendors and people. Lots of very happy & smiling faces as this is an excellent meet which was really missed the last 2 years.
Here is what I heard from a local guy. He had been running a Mallory electronic ignition on his 274 flathead w/dual carbs, heads & Isky Max cam. The module failed so he called MSD that bought out Mallory to get another one. No modules. He asked MSD if they were supporting Mallory, "No". MSD apparently bought the competition. Speedway had a couple left, so he got one from them. That one failed. He bought the Stromberg ignition, and was informed that their module was made by Petronix. He installed it on his engine and was very pleased with it for the following reasons; 1. He could not get the Mallory to idle below 850 by adjusting the 2 carbs and the timing, and the Stromberg ran at 675. He also noted it started quicker, and had more power, apparently from a stronger spark. Be interested in other shared experiences
russcc is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:21 AM.