The Ford Barn

C1Nelson · 04-16-2022, 03:19 PM

I bought new oil pan cork gaskets from Snyder’s. Part #A-6781-C

On the front of the package there is a label that says they are Self Sealing.

Use of any additional sealer will damage the gaskets.

The motor is in the car and I was going to use permatex, contact cement etc. to glue the gasket to the bottom of the motor while I install the pan.

Has anybody used these gaskets while the motor is in the car? How did you do it? I saw an article about installing a Leakless Pan Gasket written by Frank Rosin in Washington and was going to use his method. But now I don’t know if I can?

Thanks guys. I appreciate your help.

04-16-2022, 03:19 PM	#1
C1Nelson Member Join Date: Aug 2014 Location: Nampa, Idaho Posts: 67	Self sealing pan gaskets I bought new oil pan cork gaskets from Snyder’s. Part #A-6781-C On the front of the package there is a label that says they are Self Sealing. Use of any additional sealer will damage the gaskets. The motor is in the car and I was going to use permatex, contact cement etc. to glue the gasket to the bottom of the motor while I install the pan. Has anybody used these gaskets while the motor is in the car? How did you do it? I saw an article about installing a Leakless Pan Gasket written by Frank Rosin in Washington and was going to use his method. But now I don’t know if I can? Thanks guys. I appreciate your help.