The Ford Barn

deuce lover · 12-12-2019, 04:08 AM

It cost me last yr to do a bone stock 21 stud '36 LB motor $1200 in parts(+$150 in shipping to France) and $1200 in machine work and labor.Located all the parts(pistons,rings,valves,lifters & bearings) on EBAY.C& G for the gasket set.Boring without removing the studs,turning the crank,setting the valves and reassembly done here in France.I thought I did good.

In or around 2008 I assisted in selling off an estate in West Covina,CA.In that load was an early and mint complete set of Ardun heads.The Valve covers said "Ardun Made in England" I failed to note the number that was on them.Story goes that they came from Blairs Speed Shop and had been run only once. Had them on EBAY for 24 hrs before I killed the auction.Had to many curious questions .Because of that listing I met a fellow(Wasted Willie) who has 6 sets and 3 of those were NOS in their boxes.He has since passed away.

12-12-2019, 04:08 AM	#31
deuce lover Senior Member Join Date: May 2010 Location: Rockwall TX Posts: 6,019	Re: What is the price of a rebuilt flathead?? It cost me last yr to do a bone stock 21 stud '36 LB motor $1200 in parts(+$150 in shipping to France) and $1200 in machine work and labor.Located all the parts(pistons,rings,valves,lifters & bearings) on EBAY.C& G for the gasket set.Boring without removing the studs,turning the crank,setting the valves and reassembly done here in France.I thought I did good. In or around 2008 I assisted in selling off an estate in West Covina,CA.In that load was an early and mint complete set of Ardun heads.The Valve covers said "Ardun Made in England" I failed to note the number that was on them.Story goes that they came from Blairs Speed Shop and had been run only once. Had them on EBAY for 24 hrs before I killed the auction.Had to many curious questions .Because of that listing I met a fellow(Wasted Willie) who has 6 sets and 3 of those were NOS in their boxes.He has since passed away. Last edited by deuce lover; 12-12-2019 at 05:51 AM.