Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-03-2018, 12:06 PM   #21
BUBBAS IGNITION
Senior Member
 
BUBBAS IGNITION's Avatar
 
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
Default Re: Testing Echlin FA49 condenser with capacitor tester

Quote:
Originally Posted by marko39 View Post
after reading these posts i did some testing with my Sun Master Motor Tester on several nors. condensers and a new FA49. tests are for resistance,capacity and leakage. all the nors. ones showed low capacity,less than .30 and most showed leakage. i thought the tester was not correct until i tested the FA49 which showed no leakage and .35 mfd. so, dont buy any old stock condensers as your chances of getting a good one are slim.
Yep i bought a large box of helmet condensors at a auction once, 95% wouldnt pass the condensor leakage testing . Although these were new in the box i think they either dry out or attract moisture but very seldom check a nos unit that it will pass testing....
__________________
If it Makes Spark, we do it !!!!
www.bubbasignition.com
[email protected]
BUBBAS IGNITION is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:05 PM.