|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
01-21-2018, 11:54 AM
|
#11 |
|
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,608
|
Re: Rebuilt Flathead Problems.
I checked a stock spring at recommended installed height and compressed .030 (cam lift) witht the following results: 39lb at 1.89" and 80lb at 1.59". Then 60lb at 1.675 and 110 lb at 1.375. (no coil bind). More pressure than needed for a stock cam.
|
|
|
«
Previous Thread
|
Next Thread
»
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 05:28 AM.