|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-28-2017, 03:45 PM | #1 |
Senior Member
Join Date: May 2010
Location: Ashland KY
Posts: 1,159
|
37 engine rebuild (valve train)
Have had this engine out of my 36 5 w for several years ,has not run in over 50 years,finally got it apart,tearing up only a couple of valve guides and valves,after hot tanking engine and cleaning had Jim come ove r and mic everything,everything was in tolerance decided to do a valve and ring job and go with it,have a little green book 37-48 that tell how to do this,have accumulated all the tool over years to do the valves.Took awhile but came out really good,here's some tools I used,http://jpg
Used a dummy valve to get length from seat to lifter ,took this measurement and zero out subtract .012 or .014 ,zero this out,measure valve,which always comes out on + side ,tells me how much to remove,works every time.
__________________
DON P |
|
|
Sponsored Links (Register now to hide all advertisements) |
|