The Ford Barn

Ken Arms · 09-20-2016, 02:01 PM

I bought a rather cheap column mounted turn signal unit at a show, just trying to see it work before I permanently wire it up. I bought a 6v flasher but It does not say pos ground. I ran power to the X terminal of flasher, then a direct wire to one front light up to the correct wire of unit for that light. I connected both other flasher wires to there corresponding wires of the unit and I get nothing except a dim glow from the tip of the turn sig lever. Should I be using a pos ground flasher? BTW its a 52 F1 positive ground 6v...confused Ken

09-20-2016, 02:01 PM	#1
Ken Arms Senior Member Join Date: May 2010 Location: Essex Vermont Posts: 618	turn signals I bought a rather cheap column mounted turn signal unit at a show, just trying to see it work before I permanently wire it up. I bought a 6v flasher but It does not say pos ground. I ran power to the X terminal of flasher, then a direct wire to one front light up to the correct wire of unit for that light. I connected both other flasher wires to there corresponding wires of the unit and I get nothing except a dim glow from the tip of the turn sig lever. Should I be using a pos ground flasher? BTW its a 52 F1 positive ground 6v...confused Ken