The Ford Barn

redmodelt · 11-20-2015, 10:29 PM

David;
There are like about 7 different types of spokes used from 1909 to 1927. The 21 inch, I think were all the same, the 30 steel fellows had two different lengths depending on the rim manufacture and 3 different tenons, 1/2 5/8 and button. The non demountable wheels had about 3 different cross section profile and of course two different lengths of the spokes for front and rear.

By time you buy and split the hickory, dry it to the proper moisture content ruff out the blanks, turn them and make some mistakes along the way, you are getting deep in the pockets and time. Some spokes you can buy ready made from several places. google "mtfca wood spokes" .
Not trying to dissuade you but there is more then turning a few spokes out from a plan.

11-20-2015, 10:29 PM	#9
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,458	Re: Model T plans?? David; There are like about 7 different types of spokes used from 1909 to 1927. The 21 inch, I think were all the same, the 30 steel fellows had two different lengths depending on the rim manufacture and 3 different tenons, 1/2 5/8 and button. The non demountable wheels had about 3 different cross section profile and of course two different lengths of the spokes for front and rear. By time you buy and split the hickory, dry it to the proper moisture content ruff out the blanks, turn them and make some mistakes along the way, you are getting deep in the pockets and time. Some spokes you can buy ready made from several places. google "mtfca wood spokes" . Not trying to dissuade you but there is more then turning a few spokes out from a plan.