Truck based woody

[GB SISSON]

Unfortunately we are getting really busy with work in the woodshop again so the wody has to wait a bit. My employee took Thursday off so I went at it all day on my project. Today, being Saturday I got to finish up and now I have the rear fenders set up for good and the plywood subfloor bolted down. The plywood subfloor is some pressure treated 3/4 ply leftover from a bathroom remodel a few years back. Then I used some 1/8" steel sides from an old fire engine to make inner fenders. I have a lot of maple and a lot of marine plywood stashed away. As far as the 80,000.00 needed to build this thing, so far it has been some galvanized bolts from the local hardware store. I have a good running 8ba and a bunch of carbs and distributers, not to mention water pumps and generators and starters. I have collected good used tires all my life as a secondary passion, so I'm good to go there too. This will never be the 1000 point woody some dream of, but it will be a solid example of how a truck based commercial would have been produced on a small scale.