The Ford Barn

39er · 04-26-2013, 05:55 PM

Hope you can help, I’m trying to contact Patrick’s about getting pistons and rings for a 59a flathead but don’t seem to be able to contact them either by phone or email.
I am thinking that they are no longer trading, can someone please confirm and if this is the case recommend another supplier that will have the parts (.060th over cast piston 3 3/16 x 3 ¾ and rings) and are good to deal with.
Since I’m in New Zealand your advice would be greatly appreciated.
Thanks

JM 35 Sedan · 04-26-2013, 06:40 PM

I don't know about Patrick's. EGGE has good pistons and rings. Another source is Speedway Motors. I'm sure there are others.

Joe AZ · 04-26-2013, 09:00 PM

I was just in Casa Grande the other day, and could have checked on Patrick's for you.
I'll be through there again in a couple of weeks if you need me to check anything out for you.
Joe

Mac VP · 04-26-2013, 09:25 PM

We have in stock and are able to ship down under. Here is the link to our ENGINE PARTS PRICES. if you're going with new pistons & rings, you'd use the 8BA pistons. Here is the link:
http://www.vanpeltsales.com/FH_web/e...prices-pg1.htm

52merc · 04-26-2013, 11:29 PM

39er patricks are3 still in business i just orderd parts from them on there web site dam good to deal with i will send you a pm with contact details trev nz

52merc · 04-26-2013, 11:36 PM

Sponsored Links (Register now to hide all advertisements)

39er iv sent you a message

04-26-2013, 05:55 PM	#1
39er Junior Member Join Date: Jun 2010 Posts: 1	Supplier Information Needed Hope you can help, I’m trying to contact Patrick’s about getting pistons and rings for a 59a flathead but don’t seem to be able to contact them either by phone or email. I am thinking that they are no longer trading, can someone please confirm and if this is the case recommend another supplier that will have the parts (.060th over cast piston 3 3/16 x 3 ¾ and rings) and are good to deal with. Since I’m in New Zealand your advice would be greatly appreciated. Thanks

04-26-2013, 06:40 PM	#2
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,876	Re: Supplier Information Needed I don't know about Patrick's. EGGE has good pistons and rings. Another source is Speedway Motors. I'm sure there are others. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

04-26-2013, 09:00 PM	#3
Joe AZ Senior Member Join Date: May 2010 Location: Prescott, WI Posts: 336	Re: Supplier Information Needed I was just in Casa Grande the other day, and could have checked on Patrick's for you. I'll be through there again in a couple of weeks if you need me to check anything out for you. Joe

04-26-2013, 09:25 PM	#4
Mac VP Senior Member Join Date: May 2010 Location: Cincinnati, OH Posts: 1,465	Re: Supplier Information Needed We have in stock and are able to ship down under. Here is the link to our ENGINE PARTS PRICES. if you're going with new pistons & rings, you'd use the 8BA pistons. Here is the link: http://www.vanpeltsales.com/FH_web/e...prices-pg1.htm __________________ VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com

04-26-2013, 11:29 PM	#5
52merc Senior Member Join Date: May 2010 Location: new zealand Posts: 1,054	Re: Supplier Information Needed 39er patricks are3 still in business i just orderd parts from them on there web site dam good to deal with i will send you a pm with contact details trev nz __________________ trev,, whats life "TOUGH" whats tough ' LIFE"

04-26-2013, 11:36 PM	#6
52merc Senior Member Join Date: May 2010 Location: new zealand Posts: 1,054	Re: Supplier Information Needed Sponsored Links (Register now to hide all advertisements) 39er iv sent you a message __________________ trev,, whats life "TOUGH" whats tough ' LIFE"