The Ford Barn

Rodney Racer · 04-15-2013, 05:14 PM

OK-- Tried to enter once, seems like it did not work. I am NEW to this forum, but a long time AACA forum user. So here goes again.
I have a 48 V8 that I need to find an absolute correct plug wire set for a high point restoration.

The NEW set I have is BROWN (correct) but is cracking and brittle causing shorts inside the cap. I do not want another set from this supplier, does anyone know who has a good quality set?

OR shall I buy wire and make my own? If so, who has the correct wire and ends?

Thanks!
Rod

Rodney Racer · 04-15-2013, 05:41 PM

aw shucks -- my bad-- NOW I see my original post-- OK, so I am a dummy. Now lets get back to work.

Mike in AZ · 04-15-2013, 09:32 PM

well, heck...welcome to the 'Barn...got pics??....Mike

psogden · 04-16-2013, 03:54 PM

http://www.earlyfordstore.com
http://macsautoparts.com
www.vintageford.com

Henryat1140 · 04-19-2013, 08:53 PM

Try Rhode Island wiring

Lawson Cox · 04-19-2013, 09:32 PM

Sponsored Links (Register now to hide all advertisements)

Try Tyree Harris. Can't put my finger on his number right off. I hope someone will jump in with his number and help this fellow out.

TonyM · 04-20-2013, 08:39 AM

Here is another source. I am happy with the wiring I bought from these guys.

http://www.narragansettreproductions.com/

Mike in Mass · 04-20-2013, 09:10 AM

Quote:

Originally Posted by Lawson Cox

Try Tyree Harris. Can't put my finger on his number right off. I hope someone will jump in with his number and help this fellow out.

great guys ,super nice wrk 804-556 -5200 they did my "correct" wiring on my 39 1/2 ton

04-15-2013, 05:14 PM	#1
Rodney Racer Junior Member Join Date: Apr 2013 Location: Napa Valley Posts: 8	NEED Correct 1948 Plug Wires OK-- Tried to enter once, seems like it did not work. I am NEW to this forum, but a long time AACA forum user. So here goes again. I have a 48 V8 that I need to find an absolute correct plug wire set for a high point restoration. The NEW set I have is BROWN (correct) but is cracking and brittle causing shorts inside the cap. I do not want another set from this supplier, does anyone know who has a good quality set? OR shall I buy wire and make my own? If so, who has the correct wire and ends? Thanks! Rod

04-15-2013, 05:41 PM	#2
Rodney Racer Junior Member Join Date: Apr 2013 Location: Napa Valley Posts: 8	Re: NEED Correct 1948 Plug Wires aw shucks -- my bad-- NOW I see my original post-- OK, so I am a dummy. Now lets get back to work.

04-15-2013, 09:32 PM	#3
Mike in AZ Senior Member Join Date: May 2010 Location: Waddell, AZ Posts: 2,540	Re: NEED Correct 1948 Plug Wires well, heck...welcome to the 'Barn...got pics??....Mike

04-16-2013, 03:54 PM	#4
psogden Member Join Date: Apr 2013 Location: Auburn, CA Posts: 86	Re: NEED Correct 1948 Plug Wires http://www.earlyfordstore.com http://macsautoparts.com www.vintageford.com

04-19-2013, 08:53 PM	#5
Henryat1140 Senior Member Join Date: May 2010 Location: Hereford, Maryland Posts: 218	Re: NEED Correct 1948 Plug Wires Try Rhode Island wiring

04-19-2013, 09:32 PM	#6
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,119	Re: NEED Correct 1948 Plug Wires Sponsored Links (Register now to hide all advertisements) Try Tyree Harris. Can't put my finger on his number right off. I hope someone will jump in with his number and help this fellow out. __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

04-20-2013, 08:39 AM	#7
TonyM Senior Member Join Date: Jun 2010 Location: West Hammond, Illinois Posts: 2,851	Re: NEED Correct 1948 Plug Wires Here is another source. I am happy with the wiring I bought from these guys. http://www.narragansettreproductions.com/