|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
![]() |
|
Thread Tools | Display Modes |
|
|
#1 |
|
Senior Member
Join Date: May 2015
Location: sw ohio
Posts: 130
|
want to adjust the steering box(too much play in wheel) the cap on top of adj screw on box is it threaded or a pry off.. know how to adj ust it... thanks Dennis
|
|
|
|
|
|
#2 |
|
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 18,006
|
They are threaded and act as a lock for the star washer and adjust screw. I jack the front wheels clear of the ground. Center the wheels since this is the only spot you can affect an adjustment. Any off center and there is normal play. Adjust the sector shaft screw to bring the mesh up to minimum play. Not tight but minimum play where it will still smoothly operate on the worm. If the steering feels notchy after adjustment then there are likely damaged spots on the worm. Adjustment won't fix worn out parts.
Last edited by rotorwrench; 03-11-2017 at 04:30 PM. |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
|
#3 |
|
Senior Member
Join Date: May 2015
Location: sw ohio
Posts: 130
|
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
![]() |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|