Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-11-2017, 03:24 PM   #1
tonydennisadw
Senior Member
 
Join Date: May 2015
Location: sw ohio
Posts: 130
Default 52 ford car steering box

want to adjust the steering box(too much play in wheel) the cap on top of adj screw on box is it threaded or a pry off.. know how to adj ust it... thanks Dennis
tonydennisadw is offline   Reply With Quote
Old 03-11-2017, 04:24 PM   #2
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 18,006
Default Re: 52 ford car steering box

They are threaded and act as a lock for the star washer and adjust screw. I jack the front wheels clear of the ground. Center the wheels since this is the only spot you can affect an adjustment. Any off center and there is normal play. Adjust the sector shaft screw to bring the mesh up to minimum play. Not tight but minimum play where it will still smoothly operate on the worm. If the steering feels notchy after adjustment then there are likely damaged spots on the worm. Adjustment won't fix worn out parts.

Last edited by rotorwrench; 03-11-2017 at 04:30 PM.
rotorwrench is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-11-2017, 04:40 PM   #3
tonydennisadw
Senior Member
 
Join Date: May 2015
Location: sw ohio
Posts: 130
Default Re: 52 ford car steering box

Sponsored Links (Register now to hide all advertisements)
thanks much rotorwrench
tonydennisadw is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:57 AM.