The Ford Barn

throwback · 05-08-2012, 09:31 PM

Can any one tell me what size and thread for the nut that holds the cable on the starter terminal?

Thanks

Lawson Cox · 05-08-2012, 09:33 PM

It is not a standard size, I know that for sure. Someone will know.

Don Rogers · 05-08-2012, 10:24 PM

7/16-24 hex check nut part # 33923-S7

bbrocksr · 05-08-2012, 10:56 PM

Quote:

Originally Posted by Don Rogers

7/16-24 hex check nut part # 33923-S7

Don Are you sure that not a 5/16-24?
Bill

Scott H · 05-08-2012, 11:06 PM

Mine is a 5/16-24.
But the nut seems taller than std and the side walls seem narrower than std.

throwback · 05-09-2012, 01:27 AM

Sponsored Links (Register now to hide all advertisements)

Thank You!!!

05-08-2012, 09:31 PM	#1
throwback Senior Member Join Date: May 2010 Location: Lee's Summit, Missouri Posts: 225	1936 ford starter/nut that holds cable from switch Can any one tell me what size and thread for the nut that holds the cable on the starter terminal? Thanks

05-08-2012, 09:33 PM	#2
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: 1936 ford starter/nut that holds cable from switch It is not a standard size, I know that for sure. Someone will know.

05-08-2012, 10:24 PM	#3
Don Rogers Senior Member Join Date: May 2010 Location: Wildwood, MO. (near St. Louis) Posts: 1,792	Re: 1936 ford starter/nut that holds cable from switch 7/16-24 hex check nut part # 33923-S7

05-08-2012, 11:06 PM	#5
Scott H Senior Member Join Date: May 2010 Location: Wheaton, IL (west chicago) Posts: 558	Re: 1936 ford starter/nut that holds cable from switch Mine is a 5/16-24. But the nut seems taller than std and the side walls seem narrower than std. __________________ 36 1/2 ton pickup on 38 car frame with 1940 v8 24 stud

05-09-2012, 01:27 AM	#6
throwback Senior Member Join Date: May 2010 Location: Lee's Summit, Missouri Posts: 225	Re: 1936 ford starter/nut that holds cable from switch Sponsored Links (Register now to hide all advertisements) Thank You!!!