The Ford Barn

iceburg29 · 06-30-2024, 03:13 PM

Mallory 2301105h distributor anyone running one in their model A. If so how did you wire it up.

Jim Brierley · 07-01-2024, 10:52 AM

Sponsored Links (Register now to hide all advertisements)

With stock Model A wiring, the positive side of the coil goes to the point/condenser terminal on the dist. With other systems, such as 12v. neg ground, the neg side of the coil goes to that terminal and from the ignition switch to the pos side of the coil.

06-30-2024, 03:13 PM	#1
iceburg29 Junior Member Join Date: Sep 2012 Posts: 12	Mallory dist Mallory 2301105h distributor anyone running one in their model A. If so how did you wire it up.

07-01-2024, 10:52 AM	#2
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,251	Re: Mallory dist Sponsored Links (Register now to hide all advertisements) With stock Model A wiring, the positive side of the coil goes to the point/condenser terminal on the dist. With other systems, such as 12v. neg ground, the neg side of the coil goes to that terminal and from the ignition switch to the pos side of the coil.