|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-02-2022, 07:53 PM | #1 |
Junior Member
Join Date: Jun 2022
Posts: 2
|
1936 coupe seat
Does anyone reproduce the hinge assembly that
Allows the seat back to pivot up? Also, on the seat bottom, I have the spring loaded handle And the seat risers but what else is needed to allow the Seat to move back and fourth? Thanks |
08-03-2022, 06:52 AM | #2 |
Senior Member
Join Date: May 2010
Posts: 4,795
|
Re: 1936 coupe seat
I am not sure about the hinges but the seat handle mechanism has two round rods one going to each of the seat risers. When the handle is raised the rods pull the riser adjustment latches and allow the seat to move fore and aft. The 35 is shown below.
Last edited by Terry,OH; 08-03-2022 at 06:59 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
08-04-2022, 10:04 PM | #3 |
Senior Member
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
|
Re: 1936 coupe seat
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|