|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-29-2021, 01:38 PM | #1 |
Junior Member
Join Date: Oct 2021
Posts: 9
|
Windshield to top seal 68B Cabriolet
I just got a late 30 68B and need the top to windshield seal.
I have seen previous posts, but is there a current source? Thanks in advance. Bluedevil |
10-30-2021, 03:45 AM | #2 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,392
|
Re: Windshield to top seal 68B Cabriolet
Bob Drake “used to have” a spongy seal for 35-36 convertible that could be used. His “out of stock” is often I hear.
If you can find the seal that goes in the upper door of a closed car it can be used. However most vendors sell it pre-cut in about 30” sections. I used to could buy it in uncut lengths. It has an up side down “U” shape and the legs have to be trimmed off. It is then inserted in the header. I suppose two short pieces could be super glued together to make a longer piece …never tried it |
Sponsored Links (Register now to hide all advertisements) |
|
11-03-2021, 01:39 PM | #3 |
Junior Member
Join Date: Oct 2021
Posts: 9
|
Re: Windshield to top seal 68B Cabriolet
Ok, what goes into the channel at the top of the windshield. Lots of exposed screws.
|
11-03-2021, 01:40 PM | #4 |
Junior Member
Join Date: Oct 2021
Posts: 9
|
Re: Windshield to top seal 68B Cabriolet
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|