The Ford Barn

32forddump · 08-21-2020, 10:01 AM

Im looking for the power take off for an AA tranny.

Kurt in NJ · 08-21-2020, 12:37 PM

There's a good chance that many later ones would work, the transmission innards were used into the 50s, looking in the "green book" parts book would give you the interchange

Neil Wilson · 08-21-2020, 03:57 PM

Quote:

Originally Posted by 32forddump

Im looking for the power take off for an AA tranny.

I suggest you ask your question at the AA Forum (http://forums.aa-fords.com/ ).

And, you need to indicate what transmission you have (dual high or 4-speed).

rotorwrench · 08-21-2020, 04:37 PM

Sponsored Links (Register now to hide all advertisements)

I don't know if later ones would or not but if they do then there would be a lot of different ones available. They originally used a Ford design, one from Detroit Harvester, and one from Garwood but I believe they may only work with the later 4-speed transmission like ones made for the 30 & 31 model AA trucks. A lot of aftermarket equipment companies made there own like this link.
https://www.ebay.com/itm/Braden-Winc...-/192888921891

08-21-2020, 10:01 AM	#1
32forddump Senior Member Join Date: Jan 2012 Location: Ashby, Mass Posts: 452	power take off - AA Im looking for the power take off for an AA tranny. __________________ I know I can, I know I can http://www.flickr.com/photos/waltsprojects/

08-21-2020, 12:37 PM	#2
Kurt in NJ Senior Member Join Date: May 2010 Location: on the Littlefield Posts: 6,555	Re: power take off - AA There's a good chance that many later ones would work, the transmission innards were used into the 50s, looking in the "green book" parts book would give you the interchange

08-21-2020, 04:37 PM	#4
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 17,410	Re: power take off - AA Sponsored Links (Register now to hide all advertisements) I don't know if later ones would or not but if they do then there would be a lot of different ones available. They originally used a Ford design, one from Detroit Harvester, and one from Garwood but I believe they may only work with the later 4-speed transmission like ones made for the 30 & 31 model AA trucks. A lot of aftermarket equipment companies made there own like this link. https://www.ebay.com/itm/Braden-Winc...-/192888921891 Last edited by rotorwrench; 08-21-2020 at 04:52 PM.