|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-12-2016, 07:05 PM | #1 |
Senior Member
Join Date: May 2010
Location: Colorado
Posts: 553
|
Interior colors/materials 36Tudor Standard
My car will be a driver but I'm keeping it mostly stock or close to. Been reading the 35-36 Ford Book. I am seeing that the dash and garnish moldings for an early 36 Standard are painted Benton Gray Metallic color. Has any of you found a rattle can color that is close to the original? I'm wondering if there might be something close to the right color in some of the repair cans available at Auto Zone etc. I think I'd rather use a rattle can than mess with buying paint, using the sprayer, etc.
What are you guys using for floor mats in this model car? It appears that the stock front and rear mats should be rubber, Benton Gray. Where did you get your mats? Are they any good? Thanks . |
08-08-2016, 08:42 PM | #2 |
Senior Member
Join Date: May 2010
Location: Colorado
Posts: 553
|
Re: Interior colors/materials 36Tudor Standard
Please. Anybody have any input? I'm having a hard time finding genuine Benton Grey Metallic paint.
Thanks |
Sponsored Links (Register now to hide all advertisements) |
|
08-09-2016, 06:58 PM | #3 |
Senior Member
Join Date: Dec 2010
Location: Nor*Cal
Posts: 720
|
Re: Interior colors/materials 36Tudor Standard
I used "cast iron" i think it was krylon, it was a pretty close match on my 35, its just a driver though
__________________
Throttle Benders Est. 1949
|
08-09-2016, 09:37 PM | #4 |
Senior Member
Join Date: May 2010
Location: Colorado
Posts: 553
|
Re: Interior colors/materials 36Tudor Standard
Ball and chain, is "cast iron" a color name? I will check out Krylon and other makes to see if I can find it.
Thanks,Royal |
08-09-2016, 11:08 PM | #5 |
Senior Member
Join Date: May 2010
Location: Waddell, AZ
Posts: 2,540
|
Re: Interior colors/materials 36Tudor Standard
probably at Home Depot....sounds familiar....Mike
|
08-10-2016, 02:33 PM | #6 | |
Senior Member
Join Date: Dec 2010
Location: Nor*Cal
Posts: 720
|
Re: Interior colors/materials 36Tudor Standard
Sponsored Links (Register now to hide all advertisements)
Quote:
Kevin
__________________
Throttle Benders Est. 1949
|
|
08-10-2016, 03:12 PM | #7 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,066
|
Re: Interior colors/materials 36Tudor Standard
Go to a good automotive paint store, they have books that have various shades of grays, blacks, reds, etc. The Benton gray is a metallic ,so look at those samples. They can mix it in a spray can that has a hardener that can be injected into the can. Have all your pieces ready to paint as the hardener only makes the paint good for a couple of hours(so they say). I put mine in the refrigerator after use and I could spray with it the next day. The hardened paint gives you a much nicer job.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|