|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-13-2022, 03:15 PM | #1 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,777
|
It's Tuesday! What time is it? Tinker time!!
It's Tinker time at Marts!
One of the useful tools I have is the load leveller used when putting engines in and out. After using it many times I decided to make some improvements to mine. I was enjoying myself with some gentle tinkering and decided to turn the camera on. By coincidence I also added a new tool to the shop so I show a bit of that as well. https://youtu.be/wt4yVnvKd40 Last edited by Mart; 12-21-2022 at 01:27 PM. |
12-13-2022, 11:21 PM | #2 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 5,066
|
Re: It's Tuesday! What time is it? Tinker time!
Good improvements Mart! And I feel right at home in your shop too. I bought one of those lifters and promptly misplaced it before I even opened the box. Had to install the H six and 4 speed without it. Of course it showed up soon after. Now I understand more about the thing for next time.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
Sponsored Links (Register now to hide all advertisements) |
|
12-15-2022, 01:16 PM | #3 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,777
|
Re: It's Tuesday! What time is it? Tinker time!
Ha ha tell me about it, GB. I bought a spirit level to replace one I have somewhere but can't find. I can't find the new one either, now. It's bright red too. Jeez.
|
12-16-2022, 12:09 AM | #4 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 5,066
|
Re: It's Tuesday! What time is it? Tinker time!
I suppose we could go for the 'surgical room' garage look..... Ah, never mind, I'm slowly aquiring two of everything. Problem solved!
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
12-16-2022, 12:48 AM | #5 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,599
|
Re: It's Tuesday! What time is it? Tinker time!
3 of everything. Ones broke, ones loaned out, to who? and will it ever come home ? one will be found after much waisted time
|
12-16-2022, 04:46 AM | #6 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,646
|
Re: It's Tuesday! What time is it? Tinker time!
Sponsored Links (Register now to hide all advertisements)
Another great video Mart!,...as they all are....
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
12-16-2022, 09:04 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: It's Tuesday! What time is it? Tinker time!
Quote:
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
|
12-17-2022, 01:23 PM | #8 |
Senior Member
Join Date: May 2010
Location: Tinley Park Ill
Posts: 1,067
|
Re: It's Tuesday! What time is it? Tinker time!
I know a fellow that walked around for 20 minutes looking for a half inch wrench that was in his hand
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|