The Ford Barn

ted55ford · 06-01-2026, 11:53 AM

Hello all,
I upgraded my brake master, Im looking for a part that would fit on my line. A T fitting perhaps?...Or is a brake pedal extension needed? Please have a look at my setup...
Thanks
Ted.

evintho · 06-01-2026, 01:17 PM

I used a generic brake light switch. Welded one tab to the pedal support assembly to mount the switch and another tab to the pedal itself to trigger the switch. Works great!

https://www.fordbarn.com/forum/attac...1&d=1780337821

paul2748 · 06-01-2026, 03:54 PM

I made up a bracket that mounts on the dash/firewall brace and used an aftermarket switch (electrical) on my 54 Ford. I have a write up about it if you are interested. Message me your email and I can send you the info.

If you prefer to use an hydraulic switch, you can get a T fitting at a local auto parts store that will take a standard hydraulic switch.

Based on your picture, you could substitute that coupler on the back line with the T fitting.

cjshaker · 06-01-2026, 09:45 PM

Sponsored Links (Register now to hide all advertisements)

Ford used to use pressure activated switches in the '60s, which I've used on '50s cars, using a T fitting coming off the master. It was an easy job, but to be honest, evintho's set-up is much nicer and cleaner.

06-01-2026, 03:54 PM	#3
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 4,406	Re: Brake lights needed for my 55 Fairlane... I made up a bracket that mounts on the dash/firewall brace and used an aftermarket switch (electrical) on my 54 Ford. I have a write up about it if you are interested. Message me your email and I can send you the info. If you prefer to use an hydraulic switch, you can get a T fitting at a local auto parts store that will take a standard hydraulic switch. Based on your picture, you could substitute that coupler on the back line with the T fitting. __________________ 48 Ford Conv 56 Tbird 54 Ford Victoria Last edited by paul2748; 06-01-2026 at 04:02 PM.

06-01-2026, 09:45 PM	#4
cjshaker Senior Member Join Date: Jan 2023 Location: Ada OH Posts: 196	Re: Brake lights needed for my 55 Fairlane... Sponsored Links (Register now to hide all advertisements) Ford used to use pressure activated switches in the '60s, which I've used on '50s cars, using a T fitting coming off the master. It was an easy job, but to be honest, evintho's set-up is much nicer and cleaner.