|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-28-2024, 01:31 PM | #1 |
Junior Member
Join Date: Jul 2011
Posts: 7
|
56 F100 brakes on 37 spindles
using 14116 brg and 14276 race what thickness seal, 0.50 or 0.375 ?
|
05-28-2024, 02:32 PM | #2 |
Senior Member
Join Date: Feb 2011
Location: Arlington, Texas
Posts: 386
|
Re: 56 F100 brakes on 37 spindles
There is a huge post on the Hamb with all info you’ll ever need about this. Look for Duece Roadster. Randy was his name. He has since passed.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-28-2024, 06:37 PM | #3 |
Junior Member
Join Date: Jul 2011
Posts: 7
|
Re: 56 F100 brakes on 37 spindles
I read the post and they list 0.50 thk and some say 0.50 is wrong and others say
seal should be 0.375 thk so which is right |
05-28-2024, 07:18 PM | #4 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,227
|
Re: 56 F100 brakes on 37 spindles
I'd put the bearings in the hub and see what you think.
|
05-28-2024, 08:43 PM | #5 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,847
|
Re: 56 F100 brakes on 37 spindles
These are what I use.
Really doesn't make any difference as long as the ID and OD are correct. Last edited by rich b; 05-28-2024 at 08:49 PM. Reason: changes |
05-28-2024, 10:13 PM | #6 |
Senior Member
Join Date: May 2015
Posts: 8,488
|
Re: 56 F100 brakes on 37 spindles
Sponsored Links (Register now to hide all advertisements)
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
05-29-2024, 09:39 AM | #7 |
Junior Member
Join Date: Jul 2011
Posts: 7
|
Re: 56 F100 brakes on 37 spindles
Thanks for the info I'll try the 473441 seals
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|