The Ford Barn

clocey · 06-02-2014, 12:38 PM

Can anyone help me find a source for the floor pan that is under the front seat of a 30 Murray Fordor? I have dug through the major catalogs and ordered a few wrong parts and I can not find anyone who has one available. I would like to buy one but I think I have enough left of my original one to bring it by a local sheet metal shop to see if they can copy it
The rough dimensions are 33 3/4" wide at the rear and 31 1/4" wide at the front. It is 12 1/4" front to back and 1 1/4" deep. There is some additional metal on the sides and back to allow the floor pan to "rest" on the wood.

Any help would be appreciated

BRENT in 10-uh-C · 06-02-2014, 04:14 PM

Sponsored Links (Register now to hide all advertisements)

Steve Becker @ Berts Model-A (www.modelastore.com) would likely be the best resource for you. If he does not have one, then you can fabricate one or have it done.

06-02-2014, 12:38 PM	#1
clocey Senior Member Join Date: Jan 2013 Location: Bettendorf, Iowa Posts: 110	30 Murray Fordor under seat curtian pan Can anyone help me find a source for the floor pan that is under the front seat of a 30 Murray Fordor? I have dug through the major catalogs and ordered a few wrong parts and I can not find anyone who has one available. I would like to buy one but I think I have enough left of my original one to bring it by a local sheet metal shop to see if they can copy it The rough dimensions are 33 3/4" wide at the rear and 31 1/4" wide at the front. It is 12 1/4" front to back and 1 1/4" deep. There is some additional metal on the sides and back to allow the floor pan to "rest" on the wood. Any help would be appreciated __________________ 1930 Model A Fordor Murray Body

06-02-2014, 04:14 PM	#2
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,972	Re: 30 Murray Fordor under seat curtian pan Sponsored Links (Register now to hide all advertisements) Steve Becker @ Berts Model-A (www.modelastore.com) would likely be the best resource for you. If he does not have one, then you can fabricate one or have it done. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .