The Ford Barn

V4F · 03-20-2013, 01:55 PM

where can i get a clutch disc for my 1930 ford to my s-10 trans . stock motor / flywheel ............. thanks .. steve

Tom Wesenberg · 03-20-2013, 02:00 PM

If you're close to a driveline/ clutch shop, they can reline the one you have.

sidhartha · 03-20-2013, 03:51 PM

Kennedy engineering makes all kinds of adapter plates.. They may be of some help.

CarlG · 03-20-2013, 03:57 PM

Chances are it is an off the shelf NAPA disk. Talk to whomever did the conversion and ask them what disk they used.

V4F · 03-20-2013, 05:00 PM

cant talk to the guy as he died . i am going to reline the disc i have as it seems different than others ive seen ............. thanks all !!!

AL in NY · 03-20-2013, 06:01 PM

Sponsored Links (Register now to hide all advertisements)

Take a look at an S10 clutch disk at your local parts store. The standard S10 4x4 clutch is 10 7/8", measure your clutch and note the spline size, either 1"x14 spline (1983-1992) or 1 1/8"x26 spline (1993-up). The clutch you need should be an off the shelf item.

V4F · 03-21-2013, 08:35 AM

mine is 9" & wierd . reline is my best bet , but will go to napa !

CarlG · 03-21-2013, 10:09 AM

When you go to NAPA, look for the grey hair behind the counter. Most of the young guys can't find it if it's not in the book by make & model #

V4F · 03-21-2013, 10:52 AM

learned that yrs ago ! thanks

Tiny · 03-21-2013, 11:30 AM

Try Capitol Clutch in Sacramento. I believe thats close to you if I remember right

AL in NY · 03-21-2013, 06:15 PM

V4F - here are links to the two difference S10 spline clutches in 9 inch diameters:

1x14 spline =
http://www.speedwaymotors.com/Flathe...ion,25144.html

1 1/8x26 spline =
http://www.speedwaymotors.com/Flathe...ion,25141.html

03-20-2013, 01:55 PM	#1
V4F Senior Member Join Date: May 2010 Location: ca. Posts: 2,524	Model "a" - s-10 .. Clutch disc where can i get a clutch disc for my 1930 ford to my s-10 trans . stock motor / flywheel ............. thanks .. steve __________________ V4f

03-20-2013, 02:00 PM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Model "a" - s-10 .. Clutch disc If you're close to a driveline/ clutch shop, they can reline the one you have.

03-20-2013, 03:51 PM	#3
sidhartha Senior Member Join Date: Jul 2012 Location: Indiana Posts: 157	Re: Model "a" - s-10 .. Clutch disc Kennedy engineering makes all kinds of adapter plates.. They may be of some help.

03-20-2013, 03:57 PM	#4
CarlG Senior Member Join Date: Nov 2010 Location: Anchorage, Alaska Posts: 9,192	Re: Model "a" - s-10 .. Clutch disc Chances are it is an off the shelf NAPA disk. Talk to whomever did the conversion and ask them what disk they used. __________________ Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club

03-20-2013, 05:00 PM	#5
V4F Senior Member Join Date: May 2010 Location: ca. Posts: 2,524	Re: Model "a" - s-10 .. Clutch disc cant talk to the guy as he died . i am going to reline the disc i have as it seems different than others ive seen ............. thanks all !!! __________________ V4f

03-20-2013, 06:01 PM	#6
AL in NY Senior Member Join Date: May 2010 Location: Southern Upstate New York Posts: 1,209	Re: Model "a" - s-10 .. Clutch disc Sponsored Links (Register now to hide all advertisements) Take a look at an S10 clutch disk at your local parts store. The standard S10 4x4 clutch is 10 7/8", measure your clutch and note the spline size, either 1"x14 spline (1983-1992) or 1 1/8"x26 spline (1993-up). The clutch you need should be an off the shelf item. __________________ AL in NY Last edited by AL in NY; 03-20-2013 at 06:10 PM.

03-21-2013, 08:35 AM	#7
V4F Senior Member Join Date: May 2010 Location: ca. Posts: 2,524	Re: Model "a" - s-10 .. Clutch disc mine is 9" & wierd . reline is my best bet , but will go to napa ! __________________ V4f

03-21-2013, 10:09 AM	#8
CarlG Senior Member Join Date: Nov 2010 Location: Anchorage, Alaska Posts: 9,192	Re: Model "a" - s-10 .. Clutch disc When you go to NAPA, look for the grey hair behind the counter. Most of the young guys can't find it if it's not in the book by make & model # __________________ Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club

03-21-2013, 10:52 AM	#9
V4F Senior Member Join Date: May 2010 Location: ca. Posts: 2,524	Re: Model "a" - s-10 .. Clutch disc learned that yrs ago ! thanks __________________ V4f

03-21-2013, 11:30 AM	#10
Tiny Senior Member Join Date: May 2010 Location: Redding Cal Posts: 1,388	Re: Model "a" - s-10 .. Clutch disc Try Capitol Clutch in Sacramento. I believe thats close to you if I remember right

03-21-2013, 06:15 PM	#11
AL in NY Senior Member Join Date: May 2010 Location: Southern Upstate New York Posts: 1,209	Re: Model "a" - s-10 .. Clutch disc V4F - here are links to the two difference S10 spline clutches in 9 inch diameters: 1x14 spline = http://www.speedwaymotors.com/Flathe...ion,25144.html 1 1/8x26 spline = http://www.speedwaymotors.com/Flathe...ion,25141.html __________________ AL in NY