|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-20-2012, 06:26 PM | #1 |
Junior Member
Join Date: May 2010
Location: Towanda, KS
Posts: 16
|
Convertible Top Adjustments-49/51 Merc
Does anyone have any info on adjusting sagging top rails. mine on my '51 Merc sag a little over the back edge of my doors when the quarter (rear) windows are down.
I have a friend with a '50 that does the same thing, but his is worst. Any manuals out there? If so where could I find one, or buy a copy of the pages needed. John |
07-20-2012, 06:39 PM | #2 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,003
|
Re: Convertible Top Adjustments-49/51 Merc
Volume 2 of the 1949-51 Lincoln Mercury Overhaul Manual tells how to trouble shoot the convertible top hydraulic sytem,but I don't know of any manual that tells what to do to improve the "fit" of the top rails,etc. I know there are various set screws in the main top castings that do provide some adjustment.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-20-2012, 06:46 PM | #3 |
Junior Member
Join Date: May 2010
Location: Towanda, KS
Posts: 16
|
Re: Convertible Top Adjustments-49/51 Merc
I was wondering if there were any bushings that could be replaced that may have worn out?
|
07-20-2012, 09:04 PM | #4 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,003
|
Re: Convertible Top Adjustments-49/51 Merc
I went back and looked in my manual again and found some info. I am not sure if there are any bushings available, but for some reason I think Bill Hirsch might make some of the special bolts for convertible tops. Here are the photos of what I found.
|
07-20-2012, 09:11 PM | #5 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,003
|
Re: Convertible Top Adjustments-49/51 Merc
Here's more info. What ever you do DO NOT overload the main casting or it will break as it's only pot metal. Don't ask me how I know. I still have the hydraulic cylinder and front seat mechanism if you need it. Also have the door window switches if you need spares. Hope this helps.
|
07-21-2012, 12:00 AM | #6 |
Junior Member
Join Date: May 2010
Location: Towanda, KS
Posts: 16
|
Re: Convertible Top Adjustments-49/51 Merc
Sponsored Links (Register now to hide all advertisements)
Thanks a million... This will shed some light on my problem. I will also try and find one of the manuals for future reference. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|