Re: over heated coil
Instead of messing around till the cows come home you need to measure the current draw (AMPS) the coil primary is drawing with the engine running. To do this set your multi meter to DC AMPS scale which on most meters with this feature is 10 amps and insert your test leads into the common and amps sockets. Remove either of the coil primary wires and connect your meter in line between the coil terminal and the removed wire. With engine running you should have something like 3 or 4 amps draw reading. It will read a bit lower with higher revs. When you have done that report back. Regards, Kevin.
|