The Ford Barn - View Single Post - 1940 Ford Convertible Top Frame shoulder bolts

19Fordy · 10-19-2020, 05:43 PM

If you can't find them, you could make some by turning down a 3/8 dia. stainless bolt on a lathe and then cut new threads. I have had success doing that.

10-19-2020, 05:43 PM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,921	Re: 1940 Ford Convertible Top Frame shoulder bolts If you can't find them, you could make some by turning down a 3/8 dia. stainless bolt on a lathe and then cut new threads. I have had success doing that.