View Single Post
Old 08-15-2020, 08:37 AM   #5
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 3,432
Default Re: measure gap between rotor and plug posts in distributor cap

This may help. Make the gap 0.015" to 0.025" by gently /carefully bending the brass tab on the rotor. The rotor's tab should pass by the middle of the contact in the distributor body. If the tab becomes loose or the rotor breaks, get a new one.
Attached Images
File Type: jpg Ignition Rotor Gap 60kb.jpg (27.0 KB, 42 views)
File Type: jpg Rotor Adjusting Artwork 38kb.jpg (37.6 KB, 49 views)
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote