The Ford Barn - View Single Post - Setting Toe-in

Colorado Greg · 03-07-2011, 10:25 PM

When setting the toe-in, are the front wheels supposed to be off the ground or with the weight of the car on the wheels? It probably doesn't matter due to the solid axle but..... Les's book says to do it with the wheels off the ground and to take the measurement at the hub cap level, but I'd like to hear from some others

03-07-2011, 10:25 PM	#10
Colorado Greg Senior Member Join Date: May 2010 Location: Littleton, Colorado Posts: 241	Re: Setting Toe-in When setting the toe-in, are the front wheels supposed to be off the ground or with the weight of the car on the wheels? It probably doesn't matter due to the solid axle but..... Les's book says to do it with the wheels off the ground and to take the measurement at the hub cap level, but I'd like to hear from some others __________________ "Betsy doesn't leak oil - she just marks her spot" Last edited by Colorado Greg; 03-07-2011 at 11:20 PM.