Thread: Setting Toe-in
View Single Post
Old 03-07-2011, 09:29 PM   #7
Glenn C.
Senior Member
 
Glenn C.'s Avatar
 
Join Date: May 2010
Location: Didsbury Alberta
Posts: 838
Default Re: Setting Toe-in

Just to add one other small tip to Tom's suggestion. Apply a 4" - 6" piece of masking tape to the tread. Usually will stick good, and marks are quite readable. I have to agree, that the retracting steel tape is ackward, especially if you are working by yourself. One of these days.....(job #179845).....i think it will be time to build a proper tool that will sit on the floor, with adjustable pointers that are on centerline with the axle.
Glenn C. is offline   Reply With Quote