Re: Window Riser Handles and "Show Quality" Nickel Plated Escutcheons
Wonder if you cross drill a piece of key stock for the pin and then shave down the handle barrel. The rest of the handle may be in the way.
I have a friend who is a retired tool and die maker with a nice shop. Time to pay him a visit.
Turning it down would require removing the chrome under the nickel exposing bare metal. The cost of having them nickel plated again is minimal.
The second picture shows the furthest the handle will go into the escutcheon.
Last edited by dmaxweb; 10-21-2020 at 12:38 PM.
|