Quote:
Originally Posted by Deadforty
Sorry fella's, I installed a 80lb sender with a 50lb pump. Can changing the sending unit to a 50lb one fix this problem ? I also used "19Fordy"s diagram with a Ron Fransis CRV-1 reducer for the voltage drop. That replaced one of the "chopper" drop that I had installed a number of years ago. Now I'm wondering if I had the "chopper" one installed incorrectly and damaged the gauges. Also, the "chopper" was installed when the fuel and oil quit working.
Again, thanks for the input.
|
Yes, changing to a 50# sender that matches your gauge will work just fine.
Terry
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick)
'41 Merc Town Sedan / 260" 8CM engine
'66 Fairlane four door / "warmed up"
302