The Ford Barn - View Single Post

Flop · 10-25-2011, 07:18 AM

thanks paul!

onto the passenger side

this side is way more solid in the subrail dept

some cement and red oxide type filler

sandblasted primed and seamsealed the few pin holes i welded up

begining of the patch

after the step

tacked in

finished up

10-25-2011, 07:18 AM	#137
Flop Senior Member Join Date: Dec 2010 Location: pittsburgh pa Posts: 576	Re: 1930 Ford Sheetmetal Work thanks paul! onto the passenger side this side is way more solid in the subrail dept some cement and red oxide type filler sandblasted primed and seamsealed the few pin holes i welded up begining of the patch after the step tacked in finished up __________________ Please call or email while website is down! 412 867 1659 [email protected] https://www.facebook.com/flop.custom Last edited by Flop; 10-25-2011 at 07:25 AM.