The Ford Barn - View Single Post

Jacksonlll · 08-04-2020, 06:29 AM

If your wheel is not setting flat against the drum, it can pull the drum out of round. I had that happen when a small bit of weld was proud to the surface and it was fine until I tightened the lug nuts. It was an old welded wheel.

08-04-2020, 06:29 AM	#12
Jacksonlll Senior Member Join Date: Jul 2012 Location: Michigan-- Member of Oakleaf of MARC Posts: 1,686	Re: Rear brakes If your wheel is not setting flat against the drum, it can pull the drum out of round. I had that happen when a small bit of weld was proud to the surface and it was fine until I tightened the lug nuts. It was an old welded wheel.