View Single Post
Old 12-02-2016, 02:34 PM   #17
Mitch//pa
BANNED
 
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
Default Re: #4 cylinder misfiring. Spark good. Compression 53 psi

Quote:
Originally Posted by 100IH View Post
It is simply a check for an intermittent valve that is not sealing. Frequently, a conventional compression test might not show an open valve at cranking speed if the issue is marginally sticking open. At running speeds it will show up by dropping to zero with the gage. A compression test gets a reading by cranking until the pressure levels off to the best reading and if it had a zero reading on one power stroke, it might not show as with a broken spring. The plus is, if you find a floating valve, you are already to proceed with a cyl. leakage test, which answers the issue completely. This test is only for the head scratcher problem that is inconsistent.
Ok i got what your saying ...without the schrader installed maybe on one of the consecutive compression strokes the gauge may not register anything.or register inconstantly if the valve sticks. ..
Mitch//pa is offline   Reply With Quote