View Single Post
Old 11-29-2016, 01:47 PM   #5
Jacksonlll
Senior Member
 
Jacksonlll's Avatar
 
Join Date: Jul 2012
Location: Michigan-- Member of Oakleaf of MARC
Posts: 1,686
Send a message via ICQ to Jacksonlll
Default Re: #4 cylinder misfiring. Spark good. Compression 53 psi

Make sure the spring force of the moveable arm on your points has not failed or partially failed. You can determine this with your finger. If it floats off of the cam it will idle, but that is all. We had this on one of our tours.
Jacksonlll is offline   Reply With Quote