Quote:
Originally Posted by lucky_stripe_garage
Trying to get my horn working correctly. I've removed the horn button and cleaned every contact. If I connect the wires one way the horn continuously sounds. (So I loosened the screw on the diaphragm to keep the noise down some.) But if I connect the wires the other way the horn won't sound at all. Any ideas?
As always thank you for all of the help.
Sent from my iPhone using Tapatalk
|
Do you have a picture of your horn? It sounds like an aftermarket horn that grounds through the body, rather than by the horn button. You may need to use a relay to send power to the horn, or you could wire up a separate horn button, like a door bell button.